Wastewater treatment methods

Jul 18, 2026

Leave a message

Physical treatment methods involve separating and recovering insoluble suspended pollutants (including oil films and oil droplets) from wastewater through physical processes. These methods can be categorized into gravity separation, centrifugal separation, and filtration. Gravity separation includes sedimentation and flotation (air flotation), using equipment such as grit chambers, sedimentation tanks, oil separators, air flotation tanks, and their auxiliary devices. Centrifugal separation is itself a treatment unit, using centrifuges and hydrocyclones. Filtration includes screen retention and filtration; the former uses screens and grates, while the latter uses sand filters and microfiltration machines. Treatment methods based on heat exchange principles also fall under physical treatment, with units including evaporation and crystallization.

 

One method for removing organic matter from wastewater is activated carbon adsorption. Activated carbon treatment can be used in conjunction with the activated sludge process, employing powdered activated carbon. Powdered activated carbon adsorbs substances toxic to microorganisms and is ultimately collected along with the sludge. The most significant risk of activated carbon in wastewater treatment is the potential for degraded activated carbon to remain in the water indefinitely.

Chemical Treatment Methods: These methods separate and remove dissolved or colloidal pollutants from wastewater, or convert them into harmless substances, through chemical reactions and mass transfer. Chemical treatment units based on chemical reactions include coagulation, neutralization, and oxidation-reduction; while units based on mass transfer include extraction, stripping, stripping, adsorption, ion exchange, electrodialysis, and reverse osmosis. The latter two are collectively known as membrane separation technology. Units utilizing mass transfer involve both chemical and related physical processes, thus they can be separated from chemical treatment methods and classified as physicochemical methods.

 

Biological Treatment Methods: These methods utilize the metabolic processes of microorganisms to transform organic pollutants in solution, colloidal, and finely suspended states in wastewater into stable, harmless substances. Depending on the microorganisms involved, biological treatment methods can be further divided into aerobic biological treatment and anaerobic biological treatment. Aerobic biological treatment is widely used in wastewater biological treatment, which is traditionally divided into activated sludge and biofilm processes. The activated sludge process is itself a treatment unit with various operating modes. Biofilm processes include biological filters, rotating biological contactors, biological contact oxidation tanks, and biological fluidized beds. Biological oxidation ponds are also known as natural biological treatment. Anaerobic biological treatment, also known as biological reduction treatment, is mainly used to treat high-concentration organic wastewater and sludge. The primary equipment used is a digester.

 

Biocontact oxidation treats wastewater by filling a biological reactor with packing material. Oxygenated wastewater completely submerges the packing material and flows through it at a certain flow rate. A biofilm forms on the packing material, allowing extensive contact between the wastewater and the biofilm. Through the metabolism of microorganisms on the biofilm, organic pollutants are removed, and the wastewater is purified. Finally, the treated wastewater is discharged into a biological contact oxidation treatment system and mixed with domestic sewage for further treatment, including chlorination, before being discharged in compliance with standards. Biological contact oxidation is a biofilm process intermediate between activated sludge and biofilters. Its key feature is the use of packing material within the tank, with bottom aeration to oxygenate the wastewater and maintaining its flow. This ensures thorough contact between the wastewater and the submerged packing material, avoiding the uneven contact issues common in biological contact oxidation tanks. This aeration device is called blower aeration.

 

Microbial fuel cell treatment utilizes microorganisms inoculated within the fuel cell to degrade toxic substances, organic matter, and impurities. Common microbial fuel cells can be categorized as single-chamber and dual-chamber types.

Send Inquiry
Process Background

Consult

Share your finishing requirements

>

Test

Free sample trials on your workpieces

>

Quote

Custom equipment & consumables proposal

>

Deliver

Complete system + full process documentation

>